New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pinewood pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Window Replacement: The Pinewood Owner’s Guide
CGI window replacement in Pinewood typically runs $340-$780 per opening for standard vinyl or aluminum units, with impact-rated CGI replacements starting around $620 and running to $1,400 depending on the series and glazing package. We stock common CGI sash, frame, and hardware assemblies for same-day installation on most residential models found in Pinewood homes built between 2005 and 2020. Most owners first notice trouble when the window sticks in the track, the lock no longer draws the sash tight, or they feel air movement around the frame during a north breeze off the Everglades.
Which CGI Models This Applies To
CGI manufactures several distinct product families, and the replacement approach differs materially between them. The Sentinel series (single-hung and horizontal roller) uses a vinyl frame with a specific wall thickness; replacement sashes must match the original generation, as CGI revised the interlock geometry around 2016. The Targa line (impact-rated aluminum) carries a heavier frame profile and laminated glass that cannot be field-cut; we verify the DP rating stamped on the existing frame before ordering. The Estate series (aluminum non-impact) shares some hardware with Targa but uses monolithic glass, so a sash swap without checking the glazing spec results in a mismatch.
We identify the correct part three ways: the CGI label inside the frame head (series, date code, and size), the rough opening measurement we take with the sash removed, and the sightline dimension (visible glass width) that tells us whether the original was a standard or custom grid. OEM CGI parts ship from the Miami warehouse in 3-5 business days; we also stock quality aftermarket equivalents for common failures like balances, locks, and weatherstrip that meet the same spec at lower cost. We are an independent service provider - not affiliated with CGI - and we specify what the opening requires, not what moves fastest.
Before
AfterSigns Your CGI Window Replacement Is Failing
- The sash drifts or won’t stay open. This points to a failed balance system, which in CGI single-hung units is typically a block-and-tackle assembly rated for the sash weight. In Pinewood, the salt air accelerates corrosion in the balance shoe, and we’ve replaced more of these in homes west of NW 27th Avenue than anywhere else in our service area.
- Visible moisture between glass panes. The insulating glass unit (IGU) has lost its seal, and the desiccant inside the spacer is saturated. Once fog appears, the low-E coating is already degrading; defogging kits do not restore the U-factor or SHGC performance.
- Lock engages but the sash still rattles. The keep striker has worn or the frame has settled, changing the lock-to-keep alignment. On CGI horizontal rollers, this often traces to roller wear that drops the sash below the designed interlock height.
- Frame corners show separation or caulk failure. Thermal expansion in South Florida’s daily heat cycles stresses the mechanical corners; once the frame loosens, water intrusion follows, and the rough opening begins to rot.
- Operation requires force that increases over time. Track debris, roller flat-spotting, or frame twist from foundation settlement. In Pinewood’s older slab construction near Arcola Lakes, we’ve measured frame racking up to 3/8 inch that no amount of lubrication corrects.
Replacement Cost & What’s Included
| CGI Window Type | Typical Range (Installed) | What’s Included |
|---|---|---|
| Standard vinyl single-hung (Sentinel) | $340-$520 | Sash, balance, lock, interior/exterior trim, disposal |
| Impact aluminum single-hung (Targa) | $620-$950 | Rated frame, laminated glazing, anchorage, permit |
| Horizontal roller (Sentinel or Targa) | $480-$780 | Sash, rollers, screen, track cleaning |
| Custom size or geometric | $780-$1,400+ | Measured survey, factory order, installation, photo record |
What drives the range: the series (vinyl vs. aluminum, impact vs. non-impact), the glazing package (clear, low-E, or laminated), and whether the rough opening needs reframing due to water damage. Every quote we write in Pinewood starts with the measured survey you keep; the price on that document is the price on the invoice. Haven Clause 1. Our 365-Day Done Right Promise covers the installation and the hardware; glass breakage from impact carries the manufacturer’s warranty, which we register at completion.
DIY or Call Us?
There is one thing a Pinewood owner can safely check: remove the screen and look for the CGI label inside the frame head. Write down the series, size, and date code. That information determines whether the part is available or obsolete.
Everything after that carries risk. CGI impact windows weigh 40-80 pounds per sash depending on size; lifting one without proper support risks glass breakage and back injury. The balance systems in single-hung units are under spring tension, and improper release can launch components. Reframes require structural assessment of the rough opening, and impact-rated replacements must pass Miami-Dade or Florida Building Code inspection - a permit we pull and schedule as part of our scope.
We stock common CGI balances, locks, rollers, and weatherstrip on our trucks. For full sash or frame replacement, we measure once, order to spec, and return to install. Sonia Raman still uses jobs near Arcola Lakes Community Park as reference points when explaining flashing details - the lesson being that what looks right from the living room often fails at the sill pan. Call (786) 574-6217 to schedule your free estimate. Bring a competitor’s written quote and we’ll review it at no charge.
FAQs
CGI vinyl units typically perform 15-20 years in Pinewood’s climate before the frame or IGU fails; aluminum impact units often reach 25 years if the hardware is maintained. The salt air west of I-95 accelerates hardware corrosion, so locks and balances may need attention at year 10-12. Call (786) 574-6217 and we’ll inspect what you have - estimates are free.
An IGU can be replaced without changing the frame if the frame is square, the hardware functions, and the CGI series is still in production. If the frame is twisted, the balance has failed, or the series is obsolete, a sash or full-frame replacement is the only lasting fix. We measure both paths and quote each honestly.
A standard sash replacement in an existing frame takes 2-3 hours per opening; a full-frame replacement with reframe takes 4-6 hours. We schedule permitting and inspection for impact-rated work, which adds 3-5 business days to the timeline in Miami-Dade County. The measured survey we leave with you spells out the exact scope and duration.
We stock common CGI balances, locks, rollers, and weatherstrip assemblies for same-day repair on Sentinel and Targa series. Full sashes and frames are ordered to the measured spec after our survey; OEM parts ship from CGI’s Miami warehouse in 3-5 business days, and we coordinate delivery with your installation date. Call (786) 574-6217 to confirm availability for your model.
Written by Sonia Raman, Owner, Sightline Windows & Doors Pinewood at Sightline Windows & Doors Pinewood, serving Pinewood and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Pinewood
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pinewood Services
