New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pinewood pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Impact Garage Doors: The Pinewood Owner’s Guide
We stock and install Therma-Tru-compatible impact garage doors in Pinewood, with typical installed prices running $2,800-$5,400 depending on door size, wind-load rating, and hardware series. Most Therma-Tru impact-rated doors we replace in Pinewood are from the Coastal, Classic-Craft, or Fiber-Classic lines installed between 2015 and 2022, and we carry the common track, roller, hinge, and spring assemblies for same-day resolution when the door fails inspection or won’t secure properly. Most owners discover the problem two ways: the door hangs crooked in the opening, or the impact-rated glass insert cracks after a minor impact that a standard door would have shrugged off.
Which Therma-Tru Models This Applies To
Therma-Tru impact garage doors sold in South Florida fall into three series, and the part you need depends on which one is mounted in your opening. The Coastal series carries the highest Miami-Dade HVHZ rating and uses heavier-gauge track hardware; Classic-Craft and Fiber-Classic lines are impact-rated but built on lighter residential track systems that wear faster under daily cycle loads. Check the spec label on the door’s interior edge or the hinge-side jamb sticker - you’re looking for a four-digit model prefix (CFC for Coastal, CCR for Classic-Craft, FCI for Fiber-Classic) and a wind-load pressure rating in PSF.
The OEM-versus-aftermarket decision matters on Therma-Tru more than most brands because the impact certification is assembly-dependent. A non-OEM roller or hinge that fits the track physically can void the rated assembly if the gauge or bearing spec differs by even a fraction. We stock OEM-grade equivalents from the same foundries that supply Therma-Tru’s hardware subcontractors, matched by gauge and cycle rating, and we document the part number on your written scope. If your door was installed before 2018, watch for the older 2-inch roller stem; post-2018 production shifted to 2.5-inch stems that won’t retrofit without new brackets.
Before
AfterSigns Your Therma-Tru Impact Garage Door Is Failing
- The door drifts shut or won’t stay open halfway. The torsion spring system has lost tension, or the cable drums have slipped on the shaft. In Pinewood’s humidity, corrosion on the cable drum set screws is common after five to six years.
- Impact glass shows a spider crack with no obvious strike point. The laminated glass layer has delaminated at the edge, usually from thermal stress cycling or water intrusion where the glazing bead compressed unevenly.
- The opener strains, reverses, or clicks without moving the door. The track alignment has shifted, or the rollers have flattened and bind in the vertical section. We see this on Coastal-series doors in Pinewood after the concrete slab settles seasonally.
- Daylight shows between the door bottom and the seal when closed. The bottom weatherstrip has hardened, or the door panel has warped slightly. Therma-Tru’s fiberglass skins resist warp better than steel, but the seal itself is consumable.
- The manual release won’t re-engage after pulling it. The carriage trolley has worn or the opener rail has flexed out of true. This is a safety issue - the door may run without the automatic reverse functioning.
Replacement Cost & What’s Included
| Component | Typical Range in Pinewood |
|---|---|
| Single impact-rated door panel (fiberglass, 9×7) | $1,400 - $2,200 |
| Full door assembly with track and hardware | $2,800 - $4,200 |
| Coastal-series HVHZ assembly with wind-load upgrade | $3,800 - $5,400 |
| Torsion spring and cable replacement (pair) | $340 - $580 |
| Impact glass insert replacement (per lite) | $420 - $760 |
| Track alignment and roller swap | $280 - $440 |
What drives the range: door width, wind-load rating required for your Pinewood zone, whether the existing frame and track can be reused, and whether the opener needs reprogramming for the new door weight. Our written scope itemizes each line - panel, hardware, labor, disposal - and the total on that document matches the final invoice. Haven Clause 1: the measurement and the quote are the same document. Every door installation carries the 365-Day Done Right Promise and leaves a documented photo record of the completed opening.
DIY or Call Us?
There is one safe check a homeowner can make: inspect the door’s interior label and photograph the model prefix, wind-load sticker, and any visible part numbers. That saves us twenty minutes on arrival and confirms we’re bringing the right hardware.
Everything else on an impact-rated garage door carries real hazard. Torsion springs store enough torque to cause serious injury or death if released improperly. The impact glass is heavy laminated construction that requires specialized handling to avoid edge delamination. And the wind-load certification is void if any component in the assembly is substituted incorrectly. We do not recommend DIY repair on these doors. Our technicians are background-checked, uniformed, and carry license numbers you can verify before they arrive. Call (786) 574-6217 to schedule your free estimate. We’ll measure the opening, identify the exact series, and hand you the written price before any work starts.
FAQs
In Pinewood’s coastal climate, a properly installed Therma-Tru impact garage door typically delivers 15 to 20 years of service life, though the torsion spring system usually needs replacement at 8 to 12 years due to salt-air corrosion on the cable hardware. Call (786) 574-6217 for an exact quote on your door - estimates are free.
Individual components - springs, cables, rollers, weatherstrip, and impact glass inserts - can usually be repaired or swapped without replacing the full door assembly, provided the frame is square and the impact certification of the remaining assembly is intact. Call (786) 574-6217 for an exact quote - estimates are free.
A standard Therma-Tru impact garage door replacement in Pinewood takes four to six hours for a two-person crew, including removal, frame inspection, new door hang, hardware tensioning, and opener reprogramming. Call (786) 574-6217 to schedule your free estimate.
We carry the common failure items for Therma-Tru Coastal, Classic-Craft, and Fiber-Craft series - torsion springs, cable sets, rollers, hinges, and weatherstrip - matched by gauge and cycle rating to the OEM spec. Full door panels are ordered to the measured opening and typically arrive within three to five business days. Call (786) 574-6217 for an exact quote - estimates are free.
Written by Sonia Raman, Owner, Sightline Windows & Doors Pinewood at Sightline Windows & Doors Pinewood, serving Pinewood and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Pinewood
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pinewood Services
