New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pinewood pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Custom & Geometric Windows in Pinewood: What to Know First
As an independent Therma-Tru service provider in Pinewood, we measure, order, and install custom and geometric windows from Therma-Tru’s current and legacy lines - arched tops, round tops, trapezoids, and oversized rectangular units - with a written price before any work starts and a documented photo record when it finishes. Most Therma-Tru custom window jobs in Pinewood run three to five weeks from measured survey to install, depending on whether the unit is stock-configured or requires factory glass bending. We do not quote over the phone; Haven Clause 1 means the measurement and the quote are the same document, and you’ll have both in hand before we order.
This page is for Pinewood homeowners who already have Therma-Tru windows and need a shaped or oversized replacement, or who are comparing Therma-Tru against other custom options for a new opening. Call (786) 574-6217 to schedule your measured survey. Estimates are free.
How Therma-Tru Products Fail - and How We Fix Them
- Classic-Craft arched units develop seal failure at the crown. The thermal break in Therma-Tru’s Classic-Craft fiberglass arch top is compressed tighter at the apex than at the jambs, and after six to eight years in Pinewood’s UV load, the silicone primary seal degrades faster at that stress point. We see this on homes near Arcola Lakes Community Park where afternoon sun hits the elevation hard. We replace with OEM or equal-laminated glass, re-bed with neutral-cure silicone rated for south Florida exposure, and document the sightline measurement so the replacement matches the original radius exactly.
- Smooth-Star trapezoid and pentagon shapes accumulate water at the sill nose. Therma-Tru’s Smooth-Star line uses a weep system designed for rectangular geometry; when the sill is cut to an angle for a trapezoid, the factory weep channels don’t terminate properly. Water pools behind the sill cover and rots the sub-sill framing. Our fix: we fabricate a custom sill pan with end dams, redirect weeps to the lowest point, and flash with self-adhered membrane per the manufacturer’s detail - modified for the actual angle we measure on site.
- Entry door sidelites with curved tops warp at the mullion post. The sidelite assembly on Therma-Tru entry systems uses a PVC mullion that expands differently than the fiberglass door slab. In Pinewood’s humidity cycles, this differential movement cracks the corner gaskets on radius-top sidelites. We replace the mullion with a thermally broken aluminum substitute, re-gasket with compression seals sized to the measured gap, and shim to maintain equal sightlines both sides of the door.
- Legacy steel-edge geometric units rust at the weld. Pre-2015 Therma-Tru geometric windows with steel reinforcement at the corners show rust bloom where the factory powder coat missed the interior weld seam. The rust swells the frame, cracks the glazing bead, and compromises the unit structurally. We don’t patch this; we spec a full replacement in current fiberglass or composite construction, match the sightlines to the adjacent units, and document the original rough opening in case the rust has spread into the framing.
- Oversized Direct Glaze rectangles sag at the header. Therma-Tru’s Direct Glaze fixed windows over 60 inches wide rely on the rough opening header for support, but the nailing fin doesn’t distribute load across the full width. In Pinewood’s older block construction, we’ve found headers that have settled 1/4 inch or more, putting the unit in torsion. We install a steel tube lintel above the replacement, transfer the load to the jambs, and re-measure the opening square before ordering the new unit - because a geometric window with a twisted frame will never seal.
Before
AfterOur Therma-Tru Custom & Geometric Windows Process
- 1
Measured survey. Sonia Raman or a verified crew member arrives with a laser measure, level, and camera. We record rough opening width, height, diagonal square, sill angle, and header condition. You keep a copy; this is the document the quote is built from.
- 2
Diagnostics and parts decision. We identify the Therma-Tru series, model year, and failure mode. If OEM glass or frame extrusion is available with reasonable lead time, we quote it. If factory lead time exceeds eight weeks or the part is discontinued, we quote an equal-or-better aftermarket alternative and note the performance spec difference in writing.
- 3
Written price before any work starts. Haven Clause 1. The quote matches the measured survey line for line: unit cost, flashing kit, labor, disposal, permit if required. No change orders. No surprises.
- 4
Order and staging. We track the Therma-Tru factory or fabricator production schedule and call you when the unit ships. For custom geometric shapes, we verify the radius or angle against our field drawing before the glass goes into production.
- 5
Install and test. Background-checked, uniformed technicians with license numbers on their badges. We install per manufacturer spec, shim to measured plumb, seal with specified materials, and test operability (if applicable) and water infiltration with a calibrated spray rack or hose test per ASTM E1105.
- 6
Documentation and close. Photo record of every stage: before, rough opening condition, install in progress, finished unit, sealant detail, cleanup. You get the digital file. The 365-Day Done Right Promise is stamped on your invoice. Measure it right the first time and the second visit is a follow-up, not a fix.
What Therma-Tru Custom & Geometric Windows Costs in Pinewood
| Scenario | Typical Range | What Moves the Price |
|---|---|---|
| Standard rectangular replacement, stock size | $890 - $1,450 per opening | Impact rating, low-E coating, frame color match to existing |
| Geometric shape (arch, trapezoid, circle top), factory order | $1,650 - $3,200 per opening | Radius complexity, glass type, factory lead time |
| Oversized Direct Glaze fixed unit, 60″+ width | $2,400 - $4,800 per opening | Header reinforcement required, crane or hoist access, glass thickness |
| Entry door sidelite with curved top, including mullion replacement | $1,200 - $2,100 per sidelite | Mullion material (PVC vs. thermally broken aluminum), sidelite width |
| Full-frame replacement with structural repair (rust, rot, settled header) | $3,500 - $6,500 per opening | Extent of framing damage, permit requirements, interior finish repair |
These are 2024-2025 price ranges for the Pinewood market, based on jobs we’ve completed from Miami Gardens north to the county line. Your measured survey will produce an exact written quote. Call (786) 574-6217 to schedule - estimates are free, and we offer a free second opinion on any written estimate you’ve already received.
Why Pinewood Homeowners Call Sightline Windows & Doors Pinewood for Therma-Tru Work
We are not a Therma-Tru dealer. We are an independent installer who knows the product lines well enough to source parts, match sightlines, and honor factory warranties without voiding them through improper handling. When Therma-Tru lead times stretch or a series is discontinued, we specify from our other seven manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, and ViewLux - based on what your opening requires, not what we have in stock.
Haven Clause 3 means the technician at your door is background-checked, uniformed, and identified by license number before arrival. Haven Clause 4 means you get a photo record of every visit. The 365-Day Done Right Promise is not a courtesy; it’s stamped on every job under the Haven Standard that has governed every one of our 18,000+ installations since 2012. If it’s not done right, we make it right.
Calls are answered by a live person, 24/7. Not a voicemail queue. Not a callback window.
FAQs
No, provided the work is performed to factory spec and documented. As an independent Therma-Tru service provider, we follow Therma-Tru’s installation instructions for each series, use specified sealants and fasteners, and record the job so warranty claims can be supported with evidence. We do not alter factory assemblies in ways that would invalidate coverage. Call (786) 574-6217 if you have a specific warranty concern - we’ll review your documentation at no charge.
Factory lead time for custom shapes from Therma-Tru typically runs four to six weeks, with arched and curved glass at the longer end. If your opening is weather-critical, we can install a temporary board-up or sealed placeholder while the unit is in production. We quote both paths in writing so you can decide. For an exact lead time on your shape and glass spec, call (786) 574-6217.
Usually yes, though not always from Therma-Tru directly. We measure the sightline dimensions, frame depth, exterior profile, and interior stop detail, then match against current Therma-Tru stock or equivalent profiles from PGT, CGI, or CWS. If the original color is discontinued, we quote a close match with the color variance noted in writing. The measured survey includes a photo comparison so you see the match before we order.
Replace if the frame is rotted, rusted, or twisted; repair if the failure is isolated to glass, seal, or hardware. We make this call based on what we find in the measured survey, not a default preference. A 1990s steel-edge unit with corner rust gets replaced. A 2018 Smooth-Star with a blown seal gets re-glazed. We explain the finding, show you the photo evidence, and quote both paths when both are viable. Call (786) 574-6217 for a free assessment.
Yes, when the scope triggers Miami-Dade County or municipal requirements - typically for structural modifications, impact-rated installations in wind-borne debris regions, or changes to egress dimensions. We identify permit requirements during the measured survey, include the permit fee in the written quote, and schedule inspection. You receive the passed inspection documentation for your records. Call (786) 574-6217 to discuss your specific job.
Written by Sonia Raman, Owner, Sightline Windows & Doors Pinewood at Sightline Windows & Doors Pinewood, serving Pinewood and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Pinewood
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pinewood Services
