New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pinewood pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
French & Double Doors in Pinewood, FL | Sightline Windows & Doors Pinewood
French and double doors bring open, light-filled transitions between indoor and outdoor living spaces. In Pinewood, FL, that openness has to stand up to hurricane-season reality. Sightline Windows & Doors Pinewood installs impact-rated French and double door systems across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, each built for Florida’s High-Velocity Hurricane Zone requirements. Whether you’re replacing a failing slider with a proper pair of French doors or designing new construction in Pinewood with a clear sightline to the backyard, we measure, specify, and install to Florida Building Code with Miami-Dade NOA-backed configurations. Call (786) 574-6217 to schedule your free on-site measurement and written quote.
Product Overview - French & Double Doors
Our French and double door systems are paired, impact-rated door panels with laminated glass in every lite. The symmetrical sightlines and multi-point locking hardware suit interior-to-exterior openings where you want the classic divided-light look without surrendering hurricane protection.
What draws Pinewood homeowners to this profile is the balance of aesthetics and code compliance. The paired panel design swings wide for moving furniture, hosting, or letting Gulf Coast breezes through when weather permits. When a storm approaches, the same door that was open to your patio becomes a sealed barrier tested to TAS protocol standards. Multi-point locking hardware engages at several points along the frame, pulling the active panel tight against the weatherstrip and maintaining the design pressure seal the NOA was issued for.
Architecturally, these doors fit traditional and Mediterranean-influenced homes common in southern Pinewood neighborhoods, but the clean sightlines work equally well on contemporary builds. We specify aluminum or vinyl frames depending on exposure, budget, and the existing window package in the home. Aluminum offers slim profiles and structural span for wider openings up to 96 inches. Vinyl brings thermal break performance and low maintenance to shaded or covered entries. Both materials accept the same laminated impact glass and hardware packages, so the choice comes down to application, not protection level.
Before
AfterTechnical Specifications
- Frame materials: Aluminum or vinyl construction. Aluminum for maximum strength in exposed coastal applications; vinyl for thermal efficiency and minimal upkeep.
- Maximum panel width: Configurations up to 96 inches wide for generous openings without compromising impact rating.
- Glass options: Laminated Impact Glass with PVB interlayer (standard for HVHZ compliance); Low-E Insulated Glass for energy performance; Tinted Glass for glare and heat reduction; Clear Glass where visual clarity is the priority.
- Color and finish options: White, Almond, Bronze, Black, and Tan powder-coat or co-extruded finishes.
- Locking hardware: Multi-point lock systems standard, engaging at the sill, center, and header for uniform compression.
- Design pressure rating: Matched to your specific wind zone, up to +/-100 PSF.
Hurricane & Compliance Performance
Laminated Impact Glass
The glass in every lite is laminated with a PVB (polyvinyl butyral) interlayer. If wind-borne debris strikes the door during a storm, the glass may crack but the interlayer holds the shards in the frame. That membrane keeps the envelope sealed and prevents the pressure changes that destroy unprotected openings. This is the fundamental difference between impact-rated and standard tempered glass.
Miami-Dade NOA / Florida Product Approval
Every configuration we quote carries its own Miami-Dade Notice of Acceptance and Florida Product Approval numbers. These are not blanket certifications. The NOA is issued to a specific assembly: frame material, glass type, hardware package, and size. We verify the numbers on your quote match the product that arrives at your Pinewood home. Your building department will check these same numbers at permit review.
FBC / HVHZ Compliance
These door systems are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Pinewood sits in a region where HVHZ standards apply, meaning products must pass stricter impact and pressure testing than standard Florida Product Approval. We only specify door lines that meet this threshold.
TAS 201 / 202 / 203 Testing Context
The protocol family for HVHZ-rated products includes TAS 201 for large-missile impact testing, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. A door that passes this family of tests has proven it can take a direct hit, survive thousands of pressure cycles, and resist unauthorized access. We reference these standards because they are the actual test methods behind the NOA.
Design Pressure for Your Wind Zone
Design pressure is measured in pounds per square foot (PSF), not wind speed in miles per hour. We match the door’s rating to your specific wind zone, up to +/-100 PSF. Never higher. A door rated beyond your zone’s requirement adds cost without adding protection. We calculate the correct rating based on your Pinewood location, exposure, and opening size.
Energy Performance Options
Low-E insulated glass packages are available on qualifying lines. These reduce solar heat gain and improve thermal performance without sacrificing impact rating. In Pinewood’s sun-exposed southern and western entries, Low-E can make a noticeable difference in how hard your AC works to maintain temperature near the door.
Color & Glass Options
Five finishes cover the architectural range we see in Pinewood homes. White and Almond suit traditional Florida ranch and coastal cottage styles. Bronze and Black work on Mediterranean and contemporary builds where darker trim contrasts with stucco or stone. Tan bridges the gap, coordinating with earth-tone exteriors without the starkness of pure white.
Glass selection depends on orientation and use. Laminated impact glass with PVB interlayer is the baseline for HVHZ compliance and comes standard. Low-E insulated glass adds thermal performance for doors that catch direct sun. Tinted glass cuts glare and heat gain on west-facing openings in Pinewood’s unshaded lots. Clear glass maximizes visible light transmission where the view is the point and shading comes from porches or awnings. We walk you through the tradeoffs during your free estimate so you’re not guessing.
Installation by Sightline Windows & Doors Pinewood in Pinewood
A Miami-Dade NOA is only as good as the installation it arrives with. Improper shimming, missing fasteners, or skipped perimeter sealing can void the rating and leave your door vulnerable in a storm. That’s why Sightline Windows & Doors Pinewood installs every French and double door to AAMA 2400/2410 practice standards with AAMA 812 low-expansion foam perimeter sealant.
Our process starts with a pre-install inspection of the rough opening. We check for level, plumb, and square, because a racked frame stresses the panels and hardware from day one. We set the frame on a bed of sealant, shim to specification, and anchor through the jamb into structural framing at the intervals the NOA requires. The AAMA 812 foam sealant fills the gap between frame and rough opening, creating a continuous air and water barrier that flexes with seasonal movement.
After setting and anchoring, we operate the panels through full swing cycles, adjust the multi-point lock for even engagement, and run a water test to confirm no leakage at the sill or jamb. We protect your floors during the work and clean the glass and tracks before we leave.
Pinewood’s coastal exposure and HVHZ jurisdiction mean permitting is not optional. We provide the Miami-Dade NOA and Florida Product Approval submittal pages your building department needs. Our crews understand the difference between a standard Florida Product Approval and the HVHZ-compliant documentation Pinewood requires. The permit gets pulled, the inspection gets passed, and your door performs as tested.
Frequently Asked Questions - French & Double Doors
What wind zone and design pressure is the French and double door rated for?
Design pressures are matched to your specific wind zone, up to +/-100 PSF. We calculate the correct rating based on your Pinewood address, exposure category, and opening dimensions. Call (786) 574-6217 for an exact specification on your project.
What is the lead time for French and double doors in Pinewood?
Lead times vary by manufacturer line, finish selection, and current demand. Most PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass configurations run 8 to 14 weeks from order to delivery in the Pinewood market. We confirm current lead times when you approve your written quote.
Does my permit require a Miami-Dade NOA or Florida Product Approval submittal?
Yes. Pinewood falls under HVHZ jurisdiction, and your building department will require Miami-Dade NOA and Florida Product Approval documentation specific to your door configuration. We provide these submittal pages with every quote and ensure the numbers match the product ordered. Call (786) 574-6217 to start your permit-ready specification.
Can I customize the size or configuration of my French doors?
Configurations are available up to 96 inches wide. Within that range, we can specify single or double panel arrangements, inswing or outswing operation, and left-hand or right-hand active panels. Custom sizes beyond 96 inches require engineering review and may not be available on all lines. We measure your opening and present options that maintain the NOA rating.
How do I maintain the frame and hardware?
Rinse aluminum and vinyl frames quarterly with fresh water to remove salt accumulation, especially on coastal-exposed Pinewood homes. Lubricate the multi-point lock and hinges annually with a silicone-based product. Inspect the weatherstrip for compression set every spring, and call us if the panels drag or the lock points fail to engage evenly. Proper maintenance extends the life of the system and preserves the impact rating.
Get a Quote - French & Double Doors in Pinewood
Ready to open your Pinewood home to the light and air a proper French door provides, with the hurricane protection Florida demands? Sightline Windows & Doors Pinewood will measure your opening, specify the right configuration from our PGT, CGI, CWS, ES Windows, ECO, or Mr-Glass lines, and deliver a written, line-item quote with no obligation. Call (786) 574-6217 today to schedule your free on-site measurement.
Written by the team at Sightline Windows & Doors Pinewood, serving Pinewood, FL and surrounding communities.
Six Reasons Homeowners Choose Sightline Windows & Doors Pinewood
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pinewood Services
