New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pinewood pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Window Installation: The Pinewood Owner’s Guide
CGI window installation in Pinewood typically runs $340-$780 per opening for a complete replacement, including the unit, flashing, and interior trim finish. We stock CGI’s most common impact-rated sash and frame assemblies for same-day installation on the 5500, 5600, and Estate series. Most Pinewood homeowners discover a problem when the bottom rail no longer seats flush after a storm, or when the weep channels clog with the limestone grit that blows off the Palmetto Expressway corridor.
Which CGI Models This Applies To
CGI marks its series on a permanent label inside the head jamb, usually visible when you tilt the sash inward. The 5500 series uses a 2-5/8 inch frame depth with a integral nail fin; the 5600 steps to 3-1/4 inches for deeper wall sections common in Pinewood’s 1980s-era CBS construction. The Estate series carries a heavier wall extrusion and a different glazing bead profile that is not interchangeable with the 5500/5600 line.
We see the compatibility gotcha most often with the glazing bead. CGI’s original equipment bead is a dual-durometer vinyl with a rigid spine and flexible leg; aftermarket equivalents that match the sightline dimension often use a single hardness and lose compression after two wet seasons. We stock both OEM CGI beads and a Florida-tested equivalent from CWS that Sonia Raman has tracked through six years of Pinewood installs without callback. If your label is faded, measure the visible glass width and the frame depth; we cross-reference both against CGI’s 2012-2024 spec sheets before ordering.
Sightline Windows & Doors Pinewood is an independent service provider, not affiliated with CGI Windows & Doors.
Before
AfterSigns Your CGI Window Installation Is Failing
- Water stains on the sill after moderate rain. In Pinewood, the driving easterly pushes rain past a failed sill pan or through weep slots that have packed with mortar fragments from original construction. The water path is predictable; the damage behind the drywall is not.
- Sash drops or won’t stay open. The balance shoe in CGI’s single-hung units wears against the aluminum track, especially in openings that face afternoon sun and cycle through thermal expansion twice daily. Once the shoe cracks, the sash weight transfers to the frame corners.
- Visible daylight between the sash and the frame. This is compression seal fatigue, accelerated by Florida’s UV load. A CGI sash seal rated for 10 years in Pennsylvania tests to six in Pinewood’s exposure. The gap means the impact rating is compromised; the glass may still stop debris, but the frame assembly will not perform to Miami-Dade protocol.
- Condensation between panes on impact-laminated units. CGI’s laminated impact glass uses a polyvinyl butyral interlayer; if the edge seal fails, moisture enters but cannot exit through the laminate. The fog is permanent and indicates the thermal break is also breached.
- Frame corners opening at the miter. This is structural. CGI’s corners are mechanically fastened and sealed; separation means either the fasteners have backed out from thermal cycling or the opening has settled. Either way, the window is no longer square and the operating hardware will bind until the frame distorts further.
Replacement Cost & What’s Included
| Scope | Price Range |
|---|---|
| CGI sash pack replacement (5500/5600 series, standard size) | $340-$520 |
| Full frame replacement with sill pan and flashing | $580-$780 |
| Estate series full unit, impact-rated | $680-$920 |
| Hardware set (locks, lifts, balances) | $85-$140 |
The range reflects three variables: the opening condition we find after removal, the trim repair scope, and whether the original install used CGI’s recommended sill pan or a field-fabricated alternative. We price each element separately on the written quote you receive before work starts; Haven Clause 1 means the measured survey and the final invoice are the same document. Our 365-Day Done Right Promise covers labor and installation materials; the CGI product warranty runs 10 years on vinyl components and lifetime on laminated glass.
DIY or Call Us?
An owner can safely check three things: verify the series label, clear weep slots with a pipe cleaner, and confirm the lock engages fully. Beyond that, CGI impact windows are not a homeowner project. The units weigh 45-90 pounds depending on size; the laminated glass cannot be cut or drilled in the field; and the Miami-Dade impact rating is voided if the install deviates from the manufacturer’s fastening pattern by even one screw position.
We have removed DIY attempts from Pinewood homes where the owner used standard deck screws instead of CGI’s specified self-tapping stainless fasteners. The window held until the first tropical storm, then the frame racked and the glass fractured at the corner. Measure it right the first time and the second visit is a follow-up, not a fix. Call (786) 574-6217 and we will schedule a measured survey; the written price arrives before any work starts.
FAQs
Twelve to eighteen years for the vinyl frame and sash, six to ten for the compression seals, and twenty-plus for laminated glass that has not been breached. The spread depends on eastern exposure, eave depth, and whether the original installer used CGI’s specified sill pan. Call (786) 574-6217 for an exact quote on replacement - estimates are free.
Hardware, balances, and weatherstrip can be replaced independently. Frame corner separation, glass fogging, or sill pan failure requires full unit replacement; the structural or seal integrity cannot be restored in the field. Call (786) 574-6217 for an exact quote - estimates are free.
A sash pack replacement takes two to three hours per opening; a full frame replacement with trim repair takes four to six. We schedule one opening per day for occupied homes to maintain security and climate control overnight. Call (786) 574-6217 to schedule - estimates are free.
We stock 5500 and 5600 series sash packs, balance shoes, and compression seals on our Pinewood service truck. Estate series and custom sizes order from CGI’s Hialeah distribution with a five-business-day lead time. Call (786) 574-6217 to confirm availability for your model - estimates are free.
Written by Sonia Raman, Owner, Sightline Windows & Doors Pinewood at Sightline Windows & Doors Pinewood, serving Pinewood and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Pinewood
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pinewood Services
