New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pinewood pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Door Installation: The Pinewood Owner’s Guide
CWS door installation in Pinewood typically runs $890-$2,400 for a standard replacement, depending on the series and whether the frame needs rework. We stock CWS-compatible hardware and frame components for same-day installation on most residential models, and we carry the full CWS catalog through our verified supplier line. Most Pinewood homeowners discover a CWS door is failing when the sweep drags, the multipoint latch won’t engage, or they feel a draft along the jamb during a summer storm - symptoms that usually mean the frame has shifted, the hinges have sagged, or the weatherstrip has compressed past its design tolerance.
Which CWS Models This Applies To
CWS manufactures three residential door series we see regularly in Pinewood: the WindPact Plus impact-rated line, the EnergyVue thermal-efficient series, and the Builders Choice entry-level range. The WindPact Plus uses a 2-5/8 inch frame depth with a reinforced corner bracket that differs from the EnergyVue’s 2-1/4 inch profile; mixing parts between these lines will leave gaps at the header that a standard shim won’t close. The model number is stamped on the hinge edge of the door slab, usually 12 inches from the top, preceded by a four-digit date code that tells us which hardware generation you have.
We source OEM CWS components direct from the distributor in Medley, but we also stock quality aftermarket equivalents from Amesbury Truth and Hoppe for hardware that CWS has discontinued. The aftermarket multipoint locks match the WindPact Plus backset exactly, but the EnergyVue pre-2019 generation used a proprietary faceplate width that only the OEM fits without milling. We’ll tell you which you need before we order anything, and we’ll show you both options on the written quote.
Before
AfterSigns Your CWS Door Installation Is Failing
- The door sticks at the top corner or drags the threshold. This usually means the hinge screws have backed out of the frame or the rough opening has settled, dropping the latch side. In Pinewood’s coral-gable construction, we see this most often on homes built between 2005 and 2015 where the original installer used standard wood screws instead of the structural fasteners CWS specifies.
- Light shows around the perimeter when the door is closed. The compression weatherstrip has flattened past its recovery point, or the door has warped slightly from south-facing exposure. CWS weatherstrip is rated for 50,000 compression cycles; in Florida’s UV load, that translates to roughly 7-9 years, not the 15 the label suggests.
- The multipoint lock won’t throw or the handle spins freely. The gearbox has stripped internally, usually from forcing the handle when the door is out of alignment. CWS gearboxes are not serviceable as a field repair; the entire mechanism must be replaced as a unit.
- Water stains on the interior jamb after heavy rain. The sill pan is compromised, the end dams were omitted during original installation, or the frame sealant has cracked. This is the failure that does structural damage fastest, because Pinewood’s driving rains hit the door face at pressure.
- The glass fogs between the panes. The insulated glass unit (IGU) seal has failed, admitting moisture that the desiccant can’t absorb. CWS uses a warm-edge spacer on EnergyVue and a standard aluminum spacer on Builders Choice; the replacement IGU must match or the sightline measurement changes.
Replacement Cost & What’s Included
| Component | Typical Range in Pinewood |
|---|---|
| CWS door slab replacement (same size, reuse frame) | $890 - $1,450 |
| Full frame-out replacement, standard opening | $1,650 - $2,400 |
| Multipoint lock / hardware replacement | $340 - $580 |
| IGU replacement (fogged glass unit) | $280 - $440 |
| Sill pan / flashing repair | $180 - $320 |
The range depends on three things we document on every measured survey: whether the rough opening is plumb and square within 1/8 inch, whether the existing frame is salvageable, and whether the interior trim needs replacement after removal. Our written quote lists each line item separately - slab, hardware, labor, disposal - and the total you sign is the total on the invoice. No change orders, no “while we were in there” additions. The 365-Day Done Right Promise covers the installation and the components we supply; manufacturer defects are handled direct with CWS or our distributor.
DIY or Call Us?
An owner can safely check three things: whether the hinge screws are tight, whether the threshold screws have backed out, and whether the weatherstrip is visibly cracked or compressed flat. Beyond that, CWS door installation involves hazards that justify a professional call. A full-frame replacement requires cutting the exterior sealant, supporting the header load during removal, and reinstalling with proper shimming and fastening to meet Miami-Dade wind-load requirements. The multipoint lock mechanism is under spring tension; releasing it without the correct tool can damage the gearbox or the faceplate.
We carry CWS-compatible hardware, weatherstrip, and frame components on every truck serving Pinewood. If you’re seeing symptoms, call (786) 574-6217 and we’ll schedule a measured survey. You’ll keep the document, and the written quote that follows will match it exactly.
FAQs
Seven to twelve years for the hardware and weatherstrip, fifteen to twenty for the slab and frame if the installation was correct and the finish is maintained. The multipoint lock and the sweep take the most abuse from salt air, UV, and daily cycling. Call (786) 574-6217 for a free condition check - estimates are free, and we’ll show you what’s wearing.
Hardware, weatherstrip, and glass units can be repaired or replaced independently. If the frame is rotted, the slab is delaminating, or the rough opening has settled more than 3/8 inch, replacement is the only fix that lasts. We’ll tell you which category you’re in after the measured survey, not before. Call (786) 574-6217 to schedule.
A slab replacement in an existing frame takes three to four hours. A full frame-out with sill pan replacement takes six to eight hours, plus any interior trim work. We schedule one day for the install and return the next morning if touch-up or adjustment is needed. Call (786) 574-6217 to book a date that works.
We stock CWS-compatible multipoint locks, hinges, weatherstrip, and sill components on every truck. Complete slabs and frames ship from the Medley distributor within 48 hours for standard sizes; custom sizes or impact-rated glass add five to seven business days. We’ll confirm availability when we write your quote. Call (786) 574-6217 to check your specific model.
Sightline Windows & Doors Pinewood is an independent service provider; we are not affiliated with CWS. We install and service CWS products as part of our verified manufacturer lines, which also include PGT, CGI, and ES Windows.
Measure it right the first time and the second visit is a follow-up, not a fix.
Written by Sonia Raman, Owner, Sightline Windows & Doors Pinewood at Sightline Windows & Doors Pinewood, serving Pinewood and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Pinewood
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pinewood Services
